Error on socket

[massi]

Hi ;-)

it's normal ?

[FI]

• IP: 92.82.228.224 <ade2010> was disconnected because: Unknown error on socket: closed

[FI]

• IP: 78.60.215.68 <KARBONADAS> was disconnected because: Unknown error on socket: closed

[FI]

• IP: 188.24.54.19 <greiere> was disconnected because: Unknown error on socket: closed

[FI]

• IP: 91.196.46.120 <[RO]dana> was disconnected because: Unknown error on socket: closed

etc  

NB. I have several connections in the hub of this type, is this normal? At the moment I am managing disconnet automatically, correct? else another way? Ideas, tips, suggestions?

Thanks in advance for the support ;-)

[LadyStardust]

How often do you get a message like this?

[massi]

Hi, it depends on the number of user present in the hub. I noticed that this error increases with the increase of users. So it's definitely in short, directly proportional. However I would say 3 / 4 messages per hour. Then it depends in fact.
Thanks for your support ;-)

NB. for exaple ...
[18:15:51]  [FI]

• IP: 93.56.107.132 <UGFFGYSETRSJFCJGHUOFGB> was disconnected because: Unknown error on socket: closed
[18:26:24]

[FI]

• IP: 89.114.52.42 <nelutu85> was disconnected because: Unknown error on socket: closed
[18:28:41]

[FI]

• IP: 92.81.38.43 <r2d2ro> was disconnected because: Unknown error on socket: closed
[18:36:45]

[FI]

• IP: 86.85.168.31 <Sander>was disconnected because: Unknown error on socket: closed
[18:38:48]

[FI]

• IP: 89.46.21.171 <iulianro> was disconnected because: Unknown error on socket: closed
[18:39:02]

[FI]

• IP: 87.121.157.30 <diana> was disconnected because: Unknown error on socket: closed
[18:43:10]

[FI]

• IP: 62.74.70.204 <elly> was disconnected because: Unknown error on socket: closed

[massi]

Hi, until now, the maximum number of this type of error was 7 / 8 in about an hour with a maximum of 700 user about how to peak, usually with 500 user, you will get about 4 / 5 errors in a 'hours. But then depends on short, the only thing I've noticed that in general, if the error comes out all the time usually 2 / 3 times in a row, then makes like a pause for the next hour ... then maybe it does more ... Or sometimes repeats itself ...
I hope I was clear with my own additional information, I thank you for your support and for the excellent work you are doing. Keep up to early and good start to the week ;-)

[FlipFlop™]

Other hubsofts don't show these errors in feed, but for example Ynhub has a counter for it: the 'Socket errors' on the Statistics-page.

They can happen due to various reasons, for example you can see a lot of them when a port is being ddos-ed. But you don't have to worry about them as long as it's only a few an hour, they mess up feed a bit, so i'll consider moving that errormessage to a higher debuglevel.

[massi]

Okay, I'll keep monitored the situation gets worse and if I will I communicate here on the forum, as I have done so far short. Very nice and helpful as always, thanks for the support and advice ;-)