FlexHub Forum

Hub and Port

Hub and Port
« on: July 06, 2012, 12:15:56 »
new hub port only sees 411 public
Other ports do not see the public, and there is less support usera the hub port 411 833 2501
help tanks !

Re: Hub and Port
« Reply #1 on: July 06, 2012, 15:23:38 »
from 120 i have 50  users

Offline LadyStardust

  • *****
  • 257
  • aka Puma
Re: Hub and Port
« Reply #2 on: July 06, 2012, 18:47:21 »
Some changes have been made, from changelog:
For ports we have introduced the new !addports and !delports commands to make it possible to change ports from inside a running hub.
For the bind you use the !set bindinterface setting in the Console category to edit the bind interface setting (its now also avaliable in the Console-Gui) A hub restart is required for this setting to take effect.

We have introduced a few new startup switches to enable or disable some commands completely from the hub

   --nogui            To disable the hub Console-GUI
   --noupdate            To disable the !update command in the hub
   --nochangeports         To disable the commands to add and remove ports inside a running hub
   --norestart            To disable the restart function from inside the hub
   --noshutdown         To disable the shutdown function from inside the hub
   --notouchrestartscript      To tell FlexHub to not touch the RestartScript.sh or RestartScript.bat used to restart the hub (it will still create one if its missing)

nogui and noupdate have been there for a while, but the rest is new, these switches are not stored in hub settings and must either be used on the commandline each time, or you can edit the FlexHub.lua file to contain them there.

Also: http://www.flexhub.org/forum/index.php?topic=490.0

Let us know if you have any more problems.
Best regards,

Re: Hub and Port
« Reply #3 on: July 08, 2012, 01:02:57 »
thanks a lot !