FlexHub Forum

FlexHub General => Report a bug => Topic started by: Hamachi on February 07, 2013, 17:03:29

Title: Information before login in only reg hub
Post by: Hamachi on February 07, 2013, 17:03:29

Hej i have look on join traffic, on only reg users.

It send info i think it dont need to send before join.

Hub:   [OUT:XX]       HSUP ADBAS0 ADBASE ADTIGR ADUCM0 ADBLO0

//it sending infomation about soft before join
Hub:   [IN:   XX]       $Lock EXTENDEDPROTOCOL_FLEXHUB_MULTIPROTOCOL_E4UE Pk=version0.2|$HubName  |

Hub:   [IN:   XX]       ISUP ADTIGR ADBASE ADUCM0
[IN:   XX]       ISID E4UE
[OUT:XX]       BINF E4UE XX
Hub:   [IN:   XX]       IINF NI\s FOsorry CT32 HU1 HI1

//it send hubbot name too!
Hub:   [IN:   XX]       BINF AAAA !XX! CT5 OP1 NI!XX! VEFlexHub\sBeta\s0.2 DE!XX!

Can it be remove or change?

There can be some small unsafe things in it :(

Title: Re: Information before login in only reg hub
Post by: en_dator on February 08, 2013, 21:27:05

The info in there is the correct one. All unique information about the hub is blocked until a complete login is made if the hub is set to private/reg-only.

Title: Re: Information before login in only reg hub
Post by: Hamachi on February 09, 2013, 13:02:17

Hmm okay my settings:

!set regonly                                Value: true                                      Allow only registered users to join the hub

the info i have sent, is then i try connect with bad nick !

What is the problem ?

Title: Re: Information before login in only reg hub
Post by: en_dator on February 10, 2013, 15:13:59

the only thing in that log i see that isnt as intended that is that it sends $Lock wich it should not do on an adc connection. And it does not send the hub bot name, it just sends the hubsoft (i.e. FlexHub)

Hub:   [IN:   XX]       BINF AAAA !XX! CT5 OP1 NI!XX! VEFlexHub\sBeta\s0.2 DE!XX!

and

Hub:   [IN:   XX]       $Lock EXTENDEDPROTOCOL_FLEXHUB_MULTIPROTOCOL_E4UE Pk=version0.2|$HubName  |

means the same things but the first one is for ADC and the second one is for NMDC

Title: Re: Information before login in only reg hub
Post by: Hamachi on February 13, 2013, 11:17:11

I have test it again:)

Info i think there need to be remove

BINF AAAA ID!MY HUB BOT CID! CT5 OP1 NI"MY HUB BOT NAME" VEFlexHub\sBeta\s0.2 DE!MY HUB BOT DESC!

It show bot CID, name, desc and hub soft version !

Hope this info can be remove.

Title: Re: Information before login in only reg hub
Post by: en_dator on February 24, 2013, 11:22:47

I have had a second look at this and there is indeed some information that should not be there.

/1d

Title: Re: Information before login in only reg hub
Post by: Hamachi on August 15, 2013, 10:31:02

has is been removed?

I looking forward for at new version of flexhub :)